Trans-tube fex

Justin Griffith · Post by **Justin Griffith** » 12 Sep 2003 2:57 pm

Hi gang,
I have a couple of questions regarding the Trans-tubefex
1.) Does there need to be a card stuck in the front for it to work?
2.)If not when I turn it on all I get is black squares across the lcd sreen and the 4 led's are lit up at the bottom.
Any help would be appreciated
Thanks,
Justin

Justin Griffith · Post by **Justin Griffith** » 12 Sep 2003 10:31 pm

help!

------------------
Justin Griffith
D-10 MSA Quadraverb GT Session 500

Chuck McGill · Post by **Chuck McGill** » 13 Sep 2003 5:04 am

Maybe Mike Brown will post about the reboot
function on this unit. You should post this
again as a question for him about a transfex.

Justin Griffith · Post by **Justin Griffith** » 13 Sep 2003 6:51 am

Thanks Chuck. I tried to reset the unit to no avail.

------------------
Justin Griffith
D-10 MSA Quadraverb GT Session 500

Dennis Wood · Post by **Dennis Wood** » 13 Sep 2003 7:29 am

Justin, talk to Mike Brown, then box it up and return it to Peaveys service center. I just returned my Tubefex and the charge was very reasonable. Quick turnaround too.
Dennis

------------------
Sierra U-12 Crown Gearless, Peavey Nashville 400,
1971 Fender Twin Reverb,
Peavey Tubefex,
Peavey Stereo 212,
Peavey TT Bandit w/ex speaker. Regal Reso, Tele, Strat, 1970 Les Paul Std.

John Lazarus · Post by **John Lazarus** » 13 Sep 2003 3:52 pm

Justin, I don't have a Trans-tube fex but am using a Tubefex. Could it be that your VA (view angle) needs to be adjusted? If it is set wrong all you see is black boxes. To access the VA press the global setting as many times as needed until you see the VA appear and move over to it using a sideways cursor>. Adjust the angle now with the up and down cursor^ and go back to PLAY. See if this works.
And, no, you do not need to keep the card in the unit to use it.

Mike Brown · Post by **Mike Brown** » 17 Sep 2003 5:55 am

Thanks for the input, guys. I overlooked this post from Justin.