Nashville 1000 Slave Amp

Pat Carlson · Post by **Pat Carlson** » 23 Aug 2005 6:56 pm

Does Peavey make a slave amp for the nashville 1000 amp ? Is a slave amp basically a speaker cabinet for the mother amp? Or does it have it's own control knobs.

Seems like most of the pro pickers use a setup like this at concerts.
Thanks Pat.

Roger Kelly · Post by **Roger Kelly** » 24 Aug 2005 4:27 am

Is this what you are talking about? http://steelguitarforum.com/Forum11/HTML/007597.html
It may be the same for a NV 1000 too?

Ken Fox · Post by **Ken Fox** » 24 Aug 2005 5:06 am

Get a PX300, powered extension. Just got one from Corson's Music. He may have another!

300 watts with a 15" BW just for steel.

Pat Carlson · Post by **Pat Carlson** » 24 Aug 2005 7:49 pm

Yes the PX 300 sounds like the rig I'm after.Have seen these B/4 but was't sure what they were called.Thanks for all the help fellas!

...Pat

John Bechtel · Post by **John Bechtel** » 24 Aug 2005 10:53 pm

So far as I know, they are out of production, but; there are probably still some in stock somewhere! They have a Blank~Panel, except for a Volume~Control. A nice addition to the N-1000! You can even place your Effects between them, if you want your main N-1000 Dry.

------------------
“Big John” Bechtel
’04 SD–10 Black Derby w/3 & 5 & Pad
’65 Re-Issue Fender Twin–Reverb Custom™ 15” Eminence
web site

Mike Brown · Post by **Mike Brown** » 25 Aug 2005 5:37 am

The Peavey PX300 was introduced in 1999, which is the same time that the Session 2000 and Nashville 1000 were introduced. The PX300 can be used as a slave amp with any combo amp that has a PRE AMP OUT jack on it.

Mike Brown
Peavey Electronics Corporation