Peavey CS-800 schematic (recent version)

David Spangler · Post by **David Spangler** » 6 May 2005 11:36 am

Anyone able to share a copy of the CS-800 schematic? This is the new version, not the older model with the cast-iron looking face.

Thanks!

------------------
David Spangler

Mike Wheeler · Post by **Mike Wheeler** » 6 May 2005 6:25 pm

Have you contacted Mike Brown at Peavey? He should be able to fix you up with anything Peavey. Great guy, and great customer service!!

His number is 1-877-732-8391, ext. 1180, 8am to 5pm.<font size="1" color="#8e236b"><p align="center">[This message was edited by Mike Wheeler on 06 May 2005 at 07:29 PM.]</p></FONT>

David Spangler · Post by **David Spangler** » 6 May 2005 6:42 pm

Thanks Mike. Was hoping to get my hands on a schematic this weekend for emergency repair.

------------------
David Spangler

David Mason · Post by **David Mason** » 7 May 2005 8:31 am

There's a guy always listing these on Ebay, won't do you much good now unless you Paypal him and he can fax you the pertinent pages... I only know because I'm hoping to sniff out a bargain on a CS-200X or a Crown D-75. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=64452&item=7321177561&rd=1

Bill Crook · Post by **Bill Crook** » 8 May 2005 5:43 am

There is 3 versions of the "CS 800" prints.

Which one do you want ????

------------------
http://home.comcast.net/~crookwf/
http://photobucket.com/albums/v479/billcrook/

David Spangler · Post by **David Spangler** » 8 May 2005 7:11 am

I believe it is the CS800s.

------------------
David Spangler

John Daugherty · Post by **John Daugherty** » 8 May 2005 7:36 am

The Peavey website states that schematics are available for $2.50 each. I doubt that you can find a better source. Peavey has great customer service BUT ... I ordered parts that should have been here last thursday. I called friday and they didn't know why it hadn't been shipped??????? There appears to be problems in the parts department.

David Spangler · Post by **David Spangler** » 8 May 2005 7:41 am

A few months ago, I ordered parts and same thing happened. I called to check and they said that there was a bottleneck in Shipping dep't. but the parts came immediately after that, so I didn't think more about it.

------------------
David Spangler

Mike Brown · Post by **Mike Brown** » 9 May 2005 8:45 am

I have e-mailed David. fyi.