Grommet for DD-3 ???

George Rozak · Post by **George Rozak** » 17 Dec 2004 6:27 pm

Anyone know a where to get a replacement for the grommet that cushions the on/off stop-screw (the screw that you have to take out to change the battery)on a DD-3? Mine pretty much disintegrated. Looks like it might need to be pretty close to an exact replacement as it appears to work in conjunction with the switch to turn the unit on & off.

Thanks...

George

------------------
Sho-Bud: Professional & Fingertip

Bill Crook · Post by **Bill Crook** » 18 Dec 2004 1:58 pm

You can check out any "Home-Depot" or "Lowes" for a small grommet which should work very well. As they are all "round", it will conform to the shape of the oblong hole of the DD-3. This is NOT a special grommet !! Look over in the screw and specitally items shelfs for them.

------------------
http://home.comcast.net/~crookwf/

http://f1.pg.photos.yahoo.com/ph/crookwf/my_photos <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Bill Crook on 18 December 2004 at 01:59 PM.]</p></FONT>

George Rozak · Post by **George Rozak** » 18 Dec 2004 11:23 pm

Thanks Bill...

------------------
Sho-Bud: Professional & Fingertip

Kevin Mincke · Post by **Kevin Mincke** » 19 Dec 2004 5:49 am

I know they're available through Roland Parts in CA but last time I checked they were around $3.50/ea plus flat rate shipping of $5.00. Think I would check a hardware/parts store as mentioned above.

George Rozak · Post by **George Rozak** » 19 Dec 2004 8:46 pm

Will do Kevin. $8.50 is a bit steep. Thanks for the help.

George

------------------
Sho-Bud: Professional & Fingertip