Webb owners please!

Eddie Thomas · Post by **Eddie Thomas** » 11 Oct 2004 4:52 am

I need to know the inside dimensions on a Webb 614 E 15" cabinet. I want to build a cabinet and I have the width, but I need the inside height. Thanks!

Jon Light (deceased) · Post by **Jon Light (deceased)** » 11 Oct 2004 5:00 am

Eddie---inside height of the box is 20" (inside width is 20 1/2".....if that doesn't agree with your data then we are comparing different cabs.)

Eddie Thomas · Post by **Eddie Thomas** » 11 Oct 2004 6:59 am

Thank's Jon, thats the measurement I needed.

------------------
Eddie Thomas 82' Push-Pull 98' Legrande II 99' Legrande II, and Evans Amps.

Jon Light (deceased) · Post by **Jon Light (deceased)** » 11 Oct 2004 7:21 am

Feel free to ask for any other specs.

Rick Johnson · Post by **Rick Johnson** » 11 Oct 2004 8:25 am

Eddie
As a rule of thumb, when you have the
OD dimensions, just subtract the material
thickness and you will be close.
If the measurement is very crital, allow
for the boxjoint and tolex. Usually another
1/8 to 3/16 overall.

------------------
Rick Johnson

Eddie Thomas · Post by **Eddie Thomas** » 11 Oct 2004 11:12 am

Thank's Rick, I appreciate it.

Morton Kellas · Post by **Morton Kellas** » 11 Oct 2004 1:41 pm

Eddie, 20 1/2" is correct. Once the tolex is added, You should have about 20 3/8" finished width.

Eddie Thomas · Post by **Eddie Thomas** » 11 Oct 2004 3:52 pm

Thank's Mort, I'm trying to get a cabinet ready for the chassis, when it gets here. I can't wait!