static

Amplifiers, effects, pickups, electronic components, wiring, etc.

Moderator: Dave Mudgett

randy
Posts: 702
Joined: 10 Jun 1999 12:01 am
Location: shelbyville, illinois, usa
State/Province: Illinois
Country: United States

static

Post by randy »

My Nash 400 has static that sounds awful. Is it probably shot?
Top
User avatar
Bobby Rountree
Posts: 287
Joined: 19 Sep 2002 12:01 am
Location: San Angelo, Texas, USA - R.I.P.
State/Province: Texas
Country: United States

Post by Bobby Rountree »

Try Cleaning the Pre EQ jacks on the front of the amp....or jump them together with a guitar cord. If this solves the problem you acan plug & unplug a cord several times...if you have a good cleaner you might spray in the jack first. Also the Pwr Amp in jack on the back can cause the same problem. When all else fails Peavey has a very reasonable repair service with a fast turn-around. I have sent three different amps to them and the repairs were perfect and the price very reasonable. Good Luck

------------------
CarterS12-U, Truetone Pup, Nashville 1000, Dan Echo, Goodrich CD-2A

Top
randy
Posts: 702
Joined: 10 Jun 1999 12:01 am
Location: shelbyville, illinois, usa
State/Province: Illinois
Country: United States

Post by randy »

Thanks Bobby. I'll sure give that a try. I't's driving me crazy. We run out from my amp to the system at the shows and everyone says they can't hear it but I sure can and it makes me a little gunshy.
Top

Return to “Electronics”