Cache card question for Mike Brown

Tom Palmer · Post by **Tom Palmer** » 25 Apr 2004 6:32 pm

Mike,
I had purchase a Rolund Cache card with all of the Newman presets when I had a Profex II and it worked fine. Recently, I decided to sell it and a gentleman purchased it for his Session 2000. I had checked with another member on the Steel Guitar Forum who is quite familar with these items and he assured me it would work. I just received an e-mail from the person who purchased the card from me and he said it wouldn't work - the display on the amp said "not a Session 2000 card". I have no problem refunding him his money but I thought I would check with you before he shipped it back in the event the card should work. As I said, it did work perfectly in my Profex II. - Thanks - Tom Palmer

Bob Snelgrove · Post by **Bob Snelgrove** » 25 Apr 2004 9:02 pm

initialize it?

bob

David Higginbotham · Post by **David Higginbotham** » 26 Apr 2004 2:16 am

Tom, if he has the manual for the amp, it will tell him how to initialize the card.

He can use the global setting, go to "cart" he will tab over to the part that say "init", press the store/execute button and the unit will format the card. He will then be able to use the programs.

Dave

------------------
'74 MSA D-10 8&4 Profex II Nashville 400

Jim Smith · Post by **Jim Smith** » 26 Apr 2004 3:45 am

If he initializes the card, that is essentially formatting it, and the Newman presets would be lost. That being said, the Newman presets don't include "TB" or tube preamp, so he should get hold of the Ronnie Neighbors presets that add "TB" to Newman's.

Mike Brown · Post by **Mike Brown** » 26 Apr 2004 10:52 am

David is correct. Thanks for the help, David.

Bob Knight · Post by **Bob Knight** » 26 Apr 2004 11:08 am

I agree with David, Jim, and Mike with one exception. When you initialize the card on the Session 2000, you will erase ALL the Newman presets and copy the Session 2000 presets to the card.

------------------
Bob Knight
Sergeant at Arms NTSGA
WWW.NTSGA.COM

Jim Florence · Post by **Jim Florence** » 26 Apr 2004 5:31 pm

That's why I have and keep 2 cards.
Jim

Tom Palmer · Post by **Tom Palmer** » 26 Apr 2004 8:55 pm

Thank you to all who responded and especially to Mike Brown for the follow-up e-mail. My customer contacted Mike Brown directly and e-mailed me back that the initial problem was operator error and everything was now working fine.

Please Close this thread. - Thanks - Tom