How to disconnect the Nashville ReverbTank?

Kenny Radas · Post by **Kenny Radas** » 25 Mar 2004 6:46 pm

How do you disconnect the reverb tank from the chassis on a Nashville 400? I tried to wiggle the white connector, but it is very snug. Thanks for any help.

Jerry Overstreet · Post by **Jerry Overstreet** » 25 Mar 2004 7:01 pm

Hi Kenny, if you mean the 2 lead harness that comes from the tank, yes it unplugs there. They molex connector should be tight. You may have to work with it some though.
..you don't want to break the solder inside the amp.
Feel free to email me if I can help.

<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Jerry Overstreet on 25 March 2004 at 07:10 PM.]</p></FONT>

Blake Hawkins · Post by **Blake Hawkins** » 26 Mar 2004 1:33 am

Sometimes the molex connector will bind against the chassis hole, making it difficult to remove.

Blake

Kenny Radas · Post by **Kenny Radas** » 26 Mar 2004 6:14 am

I finally got it off. It was real snug to say the least. Thanks again for the help.