Pro Fex II

Ted Mullenix · Post by **Ted Mullenix** » 10 Feb 2004 4:54 pm

How do I find Newman & other players settings for Pro Fex II then program those in? ...Just got unit & any help appreciated

------------------
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Ted Mullenix on 10 February 2004 at 05:00 PM.]</p></FONT>

Jim Simon · Post by **Jim Simon** » 10 Feb 2004 5:07 pm

Jeff Newman will send you his presets or you can copy them from someone else's ProFex that has them loaded. You can also load off another card and then save a backup to your own.

David Higginbotham · Post by **David Higginbotham** » 10 Feb 2004 6:58 pm

Hi Ted, this is a link to Jeff's settings. However, you will find it "very" time consuming to program all 128. I suggest you find someone who will load them on a cash card for you. If you want to get an card and send it to me I will be more than happy to set up a card for you free of charge. The card need not be a Peavey. Roland 128k, 256k, 512E, D, or G wil suffice. http://tubefex.home.comcast.net/newman.txt

Dave

------------------
Carter S-10 3&5, Tubefex, Profex II, Evans FET 500-LV

Mike Brown · Post by **Mike Brown** » 11 Feb 2004 8:37 am

I invite you to send the card to me as well and I'll be happy to load what I have on hand, which is the original Newman presets.

You may send it postage prepaid to;
Peavey Service Center
Attn; Mike Brown
412 Hwy. 80 East
Meridian, MS 39301

Please include a copy of this post and you daytime phone number.

Mike Brown
Peavey Electronics Corporation

David Higginbotham · Post by **David Higginbotham** » 11 Feb 2004 5:39 pm

That is what you call "Great customer service" there Mike! Wish more people were willing to do the same.

Dave

------------------
Carter S-10 3&5, Tubefex, Profex II, Evans FET 500-LV

Mike Brown · Post by **Mike Brown** » 12 Feb 2004 6:36 am

That's what Hartley Peavey hired me for. Thanks.