Session 400

Joe Blount · Post by **Joe Blount** » 2 May 2002 11:19 am

Hey, some of you session 400 users. what are some setting you use to get enough bottom end
without getting a muddy sound

mine is the old model, with a 15" Black widow

------------------

b0b · Post by **b0b** » 2 May 2002 12:14 pm

Moved to "electronics" section.

jerry wallace · Post by **jerry wallace** » 2 May 2002 3:33 pm

Joe, Here is what I use on my 1976 Session 400..

presence--6

treble--2

mids--3 or 4

shift--7

bass--8 or 10

------------------
Jerry Wallace-2001 Zum: D-10,8+6, "98 Zum: D-10,8+8,Nashville 1000,Session 500 ,Session 400 head only amp,Tubefex,ProfexII, Artesia, New Mexico
http://communities.msn.com/jerrywallacemusic http://www.jerrywallacemusic.com

Joe Blount · Post by **Joe Blount** » 2 May 2002 8:09 pm

Thanks Jerry for the Reply. I am going in and try your setting and see what comes out.

Dennis Detweiler · Post by **Dennis Detweiler** » 3 May 2002 11:01 am

Nearly the same...except I reverse the presence and treble settings.
Both presence and treble can move alot, depending on the room. I usually run them between 10 o'clock and 2 o'clock. If I run the bass full on, then the treble and presence have to run on the high side. Mid around 8 o'clock. Shift around noon to 1 o'clock. Bass 3 o'clock to full on.
I use two session 400s. Usually stacked.