Thank You Jack Stoner

b0b · Post by **b0b** » 20 Feb 2002 7:46 pm

Jack has decided to step down from the moderator's chair. I just wanted to take this opportunity to thank him for a job well done. It's not easy to moderate a forum like this, but Jack was up to the task. He handled it with finesse and a very professional attitude.

Thank You Very Much, Jack!

------------------
<img align=left src="http://b0b.com/coolb0b2.gif" border="0">
 -b0b- quasar@b0b.com 
-System Administrator

Michael Holland · Post by **Michael Holland** » 20 Feb 2002 8:09 pm

I second the motion, Bobby. Jack, thanks for your considerable insights into all things electronic; including amps, effects, recording, PC's and software. Your help has been invaluable to this and to many other Forumites. And did I mention you're a heck of a picker, too? See you around!

Mike

jerry wallace · Post by **jerry wallace** » 20 Feb 2002 9:44 pm

GOOD JOB JACK!!!

------------------
Jerry Wallace-2001 Zum: D-10,8+6, "98 Zum: D-10,8+8,Nashville 1000,Session 500 ,Session 400 head only amp,Tubefex,ProfexII, Artesia, New Mexico
http://communities.msn.com/jerrywallacemusic

[This message was edited by jerry wallace on 20 February 2002 at 09:45 PM.]

Jim Cohen · Post by **Jim Cohen** » 20 Feb 2002 10:04 pm

I too add my thanks for your considerable contributions.
Jimbeaux

Steve Feldman · Post by **Steve Feldman** » 21 Feb 2002 3:27 am

Me too...Thanks a lot, Jack.

Blake Hawkins · Post by **Blake Hawkins** » 21 Feb 2002 7:45 am

Yes, Thanks Jack.
What all the others said and more.
Your insights and technical experience helped explain many a technical problem.
It's rare to find someone with the combination of a solid electronics background coupled with real life experience
both electronic repair and professional playing of pedal steel, lead guitar and bass.
Blake

Joey Ace · Post by **Joey Ace** » 21 Feb 2002 8:42 am

Thanks Jack!
I learned a lot from your insights.
I hope you'll still continue to contribute.
<IMG src=http://www.randomsnacks.org/board/image ... .gif>[This message was edited by Joey Ace on 21 February 2002 at 08:44 AM.]

Gene Jones · Post by **Gene Jones** » 21 Feb 2002 8:51 am

*[This message was edited by Gene Jones on 06 May 2002 at 10:46 AM.]

Mike Brown · Post by **Mike Brown** » 21 Feb 2002 9:08 am

Jack was right on the money with almost all of his answers concerning Peavey gear and I hate to see him step down. He is a sharp guy and I wish him lots of luck.

Mike Brown
Peavey Electronics Corporation

Bill Terry · Post by **Bill Terry** » 21 Feb 2002 9:11 am

So Jack... did it finally get in the way of your beach watchin'???? Good job.

------------------
Home Page

Martin Abend · Post by **Martin Abend** » 21 Feb 2002 1:45 pm

Jack,

thanks a lot for the job. I learned a lot from you.

-martin

------------------
martin abend Pedal-Steel in Germany
s-10 sierra crown gearless 3 x4 - Regal RD45 - fender hotrod deluxe

Ron Whitworth · Post by **Ron Whitworth** » 21 Feb 2002 4:52 pm

Hi Jack;
Many THANKS from me also..I know i probably bugged the stuffin' outa you but you always answered every question i ever asked of younot only on this Forum but also via private e-mails..I can assure you this Forum will miss all of your knowledge + your timely answers..Don't stray toooo far away there buddy!! THANKS AGAIN...Ron

John Hawkins · Post by **John Hawkins** » 21 Feb 2002 6:41 pm

Jack,

My many thanks to you for all the help I have received from you regarding this monster they call a computer ! You have really helped this old computer newbie many times and I appreciated it very much !

My best wishes go to you for whatever you elect to do in your future endevors .

John

Keith Hilton · Post by **Keith Hilton** » 21 Feb 2002 7:21 pm

I regret seeing Jack step down. Jack is a quality person who has earned everyone's respect. Thanks for a great job!

Dave Robbins · Post by **Dave Robbins** » 21 Feb 2002 9:02 pm

Sorry to see you step down, Jack!

Dave (enjoy the beach!)

Paul Graupp · Post by **Paul Graupp** » 22 Feb 2002 7:19 am

Jack: Sorry to see you leave the moderator's position but I sure hope you'll stay around the Forum. I've enjoyed swapping posts with you and not only are you an ExUSAF type like me but you came from my home state and knew the things I knew about when I was a kid. Enjoy the leisure time; you have earned it !!

Regards, Paul

Allen · Post by **Allen** » 22 Feb 2002 10:40 am

Jack,
Thanks for the opportunity to learn from you. Many times you gave insight to a question, or issue, without "coloring" it. That's the sign of a true professional.
Good luck,
Allen

------------------
Allen Harry
Mullen D-10, 8 & 6
Nashville 1000

Jeff A. Smith · Post by **Jeff A. Smith** » 22 Feb 2002 2:01 pm

Jack-

Thanks for all the explanations and insight. On the bright side, maybe now we'll get to hear what you REALLY think..

Jeff S.

Donny Hinson · Post by **Donny Hinson** » 22 Feb 2002 3:18 pm

Yup, good job, Jack! Stick around, though (please).

Tim Rowley · Post by **Tim Rowley** » 22 Feb 2002 10:06 pm

Thanks Jack, for a job well done!

Tim R.

Chuck Smith · Post by **Chuck Smith** » 24 Feb 2002 2:55 pm

Thanks to a "Class Act" . Jack has helped me with advice on speakers to hooking up gear...I still plan on getting in touch with you if I build any more speaker cabinets.

Chuck Smith

Al Marcus · Post by **Al Marcus** » 24 Feb 2002 4:37 pm

Thank you Jack, for your informative and Intelligent posts.

They hae been most helpful to me and I am sure, many others on this Forum.

I especally appreciated your insight on the Computer probelems we all have had from time to time.

I hope you will continue to post on the Forum.....al

Andy Volk · Post by **Andy Volk** » 26 Feb 2002 8:42 am

Jack, I'm in your debt for the many times you've helped me both directly and indirectly by your lucid and objective posts.
thanks for a job well done!

Don Walters · Post by **Don Walters** » 2 Mar 2002 10:53 am

Jack has the abilty to criticise or disagree without sounding nasty about it. I like and apprciate that.

Thanks again, Jack. Hope you'll still have input to the Forum!

John P. Phillips · Post by **John P. Phillips** » 2 Mar 2002 1:47 pm

Jack, You've helped me many times without knowing it. I've got a wealth of info, just reading your posts. GOD BLESS !!!

------------------
"Let's go STEEL something"
If it feels good, do it. If it feels COUNTRY, do it twice
jpp