9-Volt Connectors

John De Maille · Post by **John De Maille** » 26 Feb 2006 1:04 pm

Both 9-volt connectors on my SteelDriver 11, have come apart. Does anyone know where I might get replacements for them ?

Mike Wheeler · Post by **Mike Wheeler** » 26 Feb 2006 1:23 pm

Radio Shack.

John De Maille · Post by **John De Maille** » 26 Feb 2006 9:13 pm

I didn't think it would be as easy as that. I'll give it a try. Thanks !

Jim Phelps · Post by **Jim Phelps** » 26 Feb 2006 9:18 pm

Yep, that's one thing they've got, at least they did last time I needed some.

John Daugherty · Post by **John Daugherty** » 27 Feb 2006 6:31 am

John, you can make your own connector by prying the connections from a 9v battery and soldering it to the wires. Solder the + wire to the female and the - wire to the male.

------------------
www.home.earthlink.net/~johnd37

John De Maille · Post by **John De Maille** » 27 Feb 2006 1:51 pm

Thanks for the reply's, guys. I went to Radio Shack today and got the connectors, I needed. They're both soldered in and the Steel Driver 11 is back on line. Again, thanks for the info.