Need Repairman for Boss Tone

Alan Kirk · Post by **Alan Kirk** » 5 Oct 2004 2:21 pm

Looking for someone to fix my Jordan Boss Tone. It workeed fine until I replaced the wheel on the volume pot. Not it only works in bypass. No sound at all when switched to distoration.

Help!

------------------

Glenn Suchan · Post by **Glenn Suchan** » 6 Oct 2004 10:05 am

Alan,

Those are pretty simple circuits. I haven't opened my up in a while, but if I remember correctly, they are "wired" on a perf board rather than a printed circuit board. More than likely, the problem is a cold solder connection. I would check that first.

In case you can't fix it yourself, I think LeMay does repairs on them.

Best of luck and...

Keep on pickin'!
Glenn

Jerry Overstreet · Post by **Jerry Overstreet** » 6 Oct 2004 10:09 am

You might also check to see that the battery connector wires are not broken.

Alan Kirk · Post by **Alan Kirk** » 6 Oct 2004 3:19 pm

Thanks for the tips, guys. I can at least try those things before I ship it off somewhere.

------------------

Michael Brebes · Post by **Michael Brebes** » 7 Oct 2004 11:13 am

I answered to your other post. I'm in Northridge and should be able to fix it. Email me.

Alan Kirk · Post by **Alan Kirk** » 10 Oct 2004 8:34 am

I was getting ready to ship the unit off to Mike Brebes and decided to take another look at it, using a lighted magnifier. I found the leg of one capacitor touching the leg of another capacitor. Problem solved.

Thanks, all, for your assistance.

------------------