Nashville 112
Moderator: Dave Mudgett
-
Jody Sanders
- Posts: 7055
- Joined: 12 Apr 2000 12:01 am
- Location: Magnolia,Texas, R.I.P.
- State/Province: -
- Country: United States
Nashville 112
Picked up a new Nashville 112 today. Will road test it this weekend. Jody.
-
Mike Brown
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
- State/Province: Mississippi
- Country: United States
Jody, you're a good man as I have been reading your posts on the Forum and I can tell that you have a lot of respect for the manufacturing industry. We appreciate your purchase of the Nashville 112 amplifier. But, as I have stated many times on the Forum, the Nashville 112 is rated at 80 watts and cannot compete on a stage the has a full set of drums, a keyboardist, a bass player, a guitarist and whatever other instrument that may be being used. However, it can be used in low volume level situations and should work fine.
Players(including myself) are seeking lightweight amps that are powerful. Any true tube amp of any power would not be lightweight.
Call me if I can be of assistance please let me know and thanks again for your support of Peavey products.
Mike Brown
Peavey Electronics Corporation
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Mike Brown on 13 August 2003 at 07:23 AM.]</p></FONT>
Players(including myself) are seeking lightweight amps that are powerful. Any true tube amp of any power would not be lightweight.
Call me if I can be of assistance please let me know and thanks again for your support of Peavey products.
Mike Brown
Peavey Electronics Corporation
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Mike Brown on 13 August 2003 at 07:23 AM.]</p></FONT>
-
John Cox
- Posts: 388
- Joined: 6 Mar 2003 1:01 am
- Location: Texas, USA
- State/Province: Texas
- Country: United States
-
Scott Appleton
- Posts: 1100
- Joined: 24 Mar 2003 1:01 am
- Location: Ashland, Oregon
- State/Province: Oregon
- Country: United States
-
Tony Prior
- Posts: 14717
- Joined: 17 Oct 2001 12:01 am
- Location: Charlotte NC
- State/Province: -
- Country: United States
-
Mike Brown
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
- State/Province: Mississippi
- Country: United States
The preamp has the tone mod incorporated into the circuit already, so no mod is needed. Here's a link from our website;http://www.peavey.com/products/new/nashville112.cfm
If you have questions about this new model, please feel free to contact me here at Peavey Electronics by phoning toll free to 1-877-732-8391.
Mike Brown
Peavey Electronics Corporation
If you have questions about this new model, please feel free to contact me here at Peavey Electronics by phoning toll free to 1-877-732-8391.
Mike Brown
Peavey Electronics Corporation
-
c c johnson
- Posts: 1902
- Joined: 29 Jan 1999 1:01 am
- Location: killeen,tx usa * R.I.P.
- State/Province: -
- Country: United States
I gave my nash112 its maiden voyage this past saturday. We were in a 2000 sq ft hall with rhythm guitar, lead guitar, bass, and drums. I had the pre on 3.5 and the master on 5. I had no problem being heard. No distortion and tone was great. Reminded me of in the 40s and early 50s we played even larger places with those old Epiphone and Gibson 50 and 60 watt amps with no sweat.For the first time in yrs I even left my pro fex home. My LTD and Nash 400 were crying when I got home. Great amp. CC
-
Ken Fox
- Posts: 9757
- Joined: 20 Apr 2001 12:01 am
- Location: Nashville GA USA
- State/Province: -
- Country: United States
Mike mentioned this amp was not designed for club use. Reminds me of the Fender's intent for the "Tweed Era" Fender Bassman, was not intended to be a guitar amp....
All I can say is I saw, I heard it, and I even touched one at the Dallas show! What a great little amp. I have heard Jeff Newman play every year in the Peavey booth for the last four years. He tried one of these amps out this year. It was the best tone I have heard Jeff get in that room ever, hands down! When Jeff hit that first chord on his steel, the look of surprise on his face told it all!
Another fine Peavey product produced because of the input from Mike Brown and the needs of the steel guitar community.
All I can say is I saw, I heard it, and I even touched one at the Dallas show! What a great little amp. I have heard Jeff Newman play every year in the Peavey booth for the last four years. He tried one of these amps out this year. It was the best tone I have heard Jeff get in that room ever, hands down! When Jeff hit that first chord on his steel, the look of surprise on his face told it all!
Another fine Peavey product produced because of the input from Mike Brown and the needs of the steel guitar community.
-
Marc Friedland
- Posts: 1045
- Joined: 26 Jan 1999 1:01 am
- Location: Fort Collins, CO
- State/Province: -
- Country: United States
I have just completed playing 5 nights in a row with my new Nashville 112 on my Carter S10. We were playing on a good size stage in a large room at an Indian Casino in Jackson, CA. The amp was exactly what I hoped it would be in regards to the very nice sound and small size. I have to respectfully disagree with anyone that says this amp is only for smallest of venues. I do my fair share of gigs, and perform at small honky tonks to large Rodeo and Fair events. In most situations, even in the smaller rooms, everything runs through the board. If the P.A. is not provided, the lead singer brings enough to mic or go direct with all instruments. From what I can tell at this point, the 112 can easily handle most small to medium size rooms. If the rooms is bigger than that, everything usually gets mic'd anyway, so again it will work for the larger rooms as well. -- Marc
-
Jody Sanders
- Posts: 7055
- Joined: 12 Apr 2000 12:01 am
- Location: Magnolia,Texas, R.I.P.
- State/Province: -
- Country: United States
Road test Sat. nite. Best Little Peavey Steel Guitar Amp IN The World. Clean with a lot of "punch". You can play any venue with this amp. I would personally like to thank the Peavey Corp. for providing the steel guitar community with high quality affordable amps for the past 30 years. Once again, Thank You Peavey Corp. Jody.
-
Mike Brown
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
- State/Province: Mississippi
- Country: United States
-
Frank Parish
- Posts: 3077
- Joined: 15 Sep 1999 12:01 am
- Location: Nashville,Tn. USA
- State/Province: -
- Country: United States
-
Mike Brown
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
- State/Province: Mississippi
- Country: United States
-
Ken Fox
- Posts: 9757
- Joined: 20 Apr 2001 12:01 am
- Location: Nashville GA USA
- State/Province: -
- Country: United States
-
Doc Hall
- Posts: 181
- Joined: 26 Mar 2002 1:01 am
- Location: Galveston, Tx
- State/Province: Texas
- Country: United States
I just picked a 112 up from the fine folks at Carter Steel. I have to agree that it's a winner. Fine sound, small size, reasonable weight and price. Also, the fit and finish on this amp reflects high quality. Impressive all around. Mike B. and the Peavey guys did a great job on this one. Much thanks for their supporting the needs of the steel community.
------------------
Jim Hall
League City, TX
------------------
Jim Hall
League City, TX
-
Jonathan Cullifer
- Posts: 1132
- Joined: 30 Sep 1998 12:01 am
- Location: Gallatin, TN
- State/Province: Tennessee
- Country: United States
-
Mike Brown
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
- State/Province: Mississippi
- Country: United States
-
Tore Blestrud
- Posts: 470
- Joined: 4 Aug 1998 11:00 pm
- Location: Oslo, Norway
- State/Province: -
- Country: United States
-
Mike Brown
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
- State/Province: Mississippi
- Country: United States
-
Ken Fox
- Posts: 9757
- Joined: 20 Apr 2001 12:01 am
- Location: Nashville GA USA
- State/Province: -
- Country: United States
-
Chuck McGill
- Posts: 1890
- Joined: 30 Apr 2002 12:01 am
- Location: An hour from Memphis and 2 from Nashville, R.I.P.
- State/Province: -
- Country: United States
-
Mike Brown
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
- State/Province: Mississippi
- Country: United States
-
Martin Abend
- Posts: 1037
- Joined: 1 Mar 1999 1:01 am
- Location: Berlin, Germany
- State/Province: -
- Country: United States
I don't believe it until I see that amp in a store...<SMALL>Yes, we are in the process of having an export transformer approved at this time, but as always, it will take just a bit longer to begin shipping the export version. Thanks for asking.</SMALL>

------------------
martin abend Pedal-Steel in Germany
s-10 sierra crown gearless 3 x4 | Regal RD45 | fender hotrod deluxe
-
Bobby Lee
- Site Admin
- Posts: 14863
- Joined: 4 Aug 1998 11:00 pm
- Location: Cloverdale, California, USA
- State/Province: -
- Country: United States
Mike closed the door at the ISGC for a few minutes so that I could push a pair of Nashville 112's reasonably loud. I got them to the point where I could feel some sound pressure in my ears, which is close to the volume my band plays at sometimes.
As I push them harder, I noticed that the low end compressed but didn't distort. Interesting effect! The amps were pretty well topped out, though, and it really wasn't loud enough for the outdoor gigs I play. The lows in particular will not carry well in a loud environment.
These are very rich sounding amps at low to medium indoor volume levels, though. If your band mikes your amp, one of these might be all you ever need.
Someone mentioned the XXX. From what I could hear of it in the Peavey room, I wouldn't even think of using it for steel. The voicing isn't right, and the cabinet resonates at a frequency that I didn't like. The Nashville 112 is a much better choice for steel.
I don't think that Peavey is currently making a tube amp that works well for steel. Correct me if I'm wrong, Mike!
------------------
<font size="1"><img align=right src="http://b0b.com/Hotb0b.gif" width="96 height="96">Bobby Lee - email: quasar@b0b.com - gigs - CDs, Open Hearts
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9),
Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax</font>
As I push them harder, I noticed that the low end compressed but didn't distort. Interesting effect! The amps were pretty well topped out, though, and it really wasn't loud enough for the outdoor gigs I play. The lows in particular will not carry well in a loud environment.
These are very rich sounding amps at low to medium indoor volume levels, though. If your band mikes your amp, one of these might be all you ever need.
Someone mentioned the XXX. From what I could hear of it in the Peavey room, I wouldn't even think of using it for steel. The voicing isn't right, and the cabinet resonates at a frequency that I didn't like. The Nashville 112 is a much better choice for steel.
I don't think that Peavey is currently making a tube amp that works well for steel. Correct me if I'm wrong, Mike!
------------------
<font size="1"><img align=right src="http://b0b.com/Hotb0b.gif" width="96 height="96">Bobby Lee - email: quasar@b0b.com - gigs - CDs, Open Hearts
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9),
Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax</font>
-
Ken Fox
- Posts: 9757
- Joined: 20 Apr 2001 12:01 am
- Location: Nashville GA USA
- State/Province: -
- Country: United States
Bobby, I agree about the 40 watt Triple XXX they had at the St. Louis show.
I tried the 60 watt,Triple XXX with a single 12" speaker at the Dallas Show and found it had a completely different voicing. I think it is worth a try as well as the 2-12" version rated at 120 watts. The 40 watt model was most definitely better voiced for rock, blues. The 60 watt amp had a nice voice for jazz chords with a six string. I did not find that true of the 40 watt amp at all.
I tried the Nashville 112 for six string and felt it would be a great jazz/clean amp
for six string. It definitely sounded warmer than the Nashville 100 amps in the Peavey room at St. Louis. The Nashville 1000 amps can achieve that warm tone, but it happens at a much louder volume.
All said, these are great warm sounding amps for the medium sized gig! But remember, Mike stated they are a "practice amp"! I thinjk the Peavey team never anticipated the results they are seeing from this amp. A very pleasant surprise indeed.
I would not be afraid to try one in the medium sized clubs that I play in. I do believe I will be getting one very soon myself! I think it will be a long line of people getting these amps soon, they really fit the needs of a lot of players.
I tried the 60 watt,Triple XXX with a single 12" speaker at the Dallas Show and found it had a completely different voicing. I think it is worth a try as well as the 2-12" version rated at 120 watts. The 40 watt model was most definitely better voiced for rock, blues. The 60 watt amp had a nice voice for jazz chords with a six string. I did not find that true of the 40 watt amp at all.
I tried the Nashville 112 for six string and felt it would be a great jazz/clean amp
for six string. It definitely sounded warmer than the Nashville 100 amps in the Peavey room at St. Louis. The Nashville 1000 amps can achieve that warm tone, but it happens at a much louder volume.
All said, these are great warm sounding amps for the medium sized gig! But remember, Mike stated they are a "practice amp"! I thinjk the Peavey team never anticipated the results they are seeing from this amp. A very pleasant surprise indeed.
I would not be afraid to try one in the medium sized clubs that I play in. I do believe I will be getting one very soon myself! I think it will be a long line of people getting these amps soon, they really fit the needs of a lot of players.