Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Pat Briggs
Posts: 25
Joined: 18 Apr 2025 4:28 am
Location: California, USA

Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by Pat Briggs »

Hi , I am interested in any comments you might have on the Quilter Aviator Cub. I am playing a Clinesmith frypan. Playing C6 tuning Hawaiian. Is the Quilter a good match for this style ? I have an opportunity to pick one up and wondering if it is recommended by those of you who might have some experience using one. Just going to be using it at home. Any comments / thoughts would be appreciated.
Thanks, Pat
User avatar
Brad Bechtel
Moderator
Posts: 8530
Joined: 4 Aug 1998 11:00 pm
Location: San Francisco, CA

Re: Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by Brad Bechtel »

It looks like a nice amp for the price ($750 USD). How loud do you need to be? 50 watts is overkill for my needs, but if you're playing in a loud band, it might be perfect for you.
Brad’s Page of Steel
A web site devoted to acoustic & electric lap steel guitars
Pat Briggs
Posts: 25
Joined: 18 Apr 2025 4:28 am
Location: California, USA

Re: Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by Pat Briggs »

Hi Brad, thanks for your reply. As I mentioned in my post I will just be playing at home, no band. I am just interested in the tone. 50 watts is probably overkill but my understanding is that the amp sounds good at low volumes . I am just trying to find out if players who play a similar style like the tone .
Thanks, Pat
D Schubert
Posts: 1202
Joined: 27 Jul 2000 12:01 am
Location: Columbia, MO, USA

Re: Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by D Schubert »

I have several (too many?) Quilter amps, but not that one. All of the Quilter amps seem to have one thing in common - the gain, tone, and other pre-amp controls can be set to your liking - and then the master volume knob does not seem to affect any of that, only the loudness. Quite different than all the control interactions you find with many classic tube amps, and it's a desirable characteristic for me.
GFI Expo S-10PE, Sho-Bud 6139, Fender 2x8 Stringmaster, Supro consoles, Dobro. And more.
Pat Briggs
Posts: 25
Joined: 18 Apr 2025 4:28 am
Location: California, USA

Re: Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by Pat Briggs »

Thanks D, Schubert, that quality sounds good to me in the sense that I don’t need 50 watts for playing at home but I can get a good sound at low volumes .
Mark Evans
Posts: 301
Joined: 27 Jan 2016 8:55 am
Location: Colorado, USA

Re: Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by Mark Evans »

Not an Aviator, but I run a 101 Reverb (into a blockdock 10)with lap steels. 50 watts, but the master vol marks are essentially watt measures. I run it between 10-20 watts at home. Nice clean tones, malleable tone stack. I reckon the Aviator would be similar.
Larry Pogreba Baritone 'Weissenheimer
Late 30’s Oahu Tonemaster
LSLME Chatsworth (Lap Steel Legacy Mark Evans w/Sentell cust. Single coil)
Early 40’s Mysterious Employee built National ‘New Yorker’
2017 Richard Wilson Style 1 Weissenborn
Rickenbacker ‘Ace’ lap steel
Quilter 101
Pat Briggs
Posts: 25
Joined: 18 Apr 2025 4:28 am
Location: California, USA

Re: Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by Pat Briggs »

Hi Mark , thanks for your reply. I was looking at getting the blockdock 10 with a super block instead of the aviator cub but I’m new to all of this and the aviator seemed simpler as an all in one amp. Is there a benefit to getting the separate components ? For what it’s worth the blockdock with the super block runs a bit less money. What do you think would be better. Is it more complicated to use the blockdock with the super block vs the aviator cub ?Thanks, Pat
Mark Evans
Posts: 301
Joined: 27 Jan 2016 8:55 am
Location: Colorado, USA

Re: Is Anyone using a Quilter Aviator Cub for lap steel guitar ?

Post by Mark Evans »

Can’t give a concrete opinion - head/cab vs Aviator. When I was researching , there were various opinions by jazz and tele players (pro and con) regarding the Aviator. Do some googlin’
I dig the simplicity of the 101. You’d save a bit (maybe) going 50 watts 101 Reverb. It works great for me. Got mine used.
Let’s see what others say.
Larry Pogreba Baritone 'Weissenheimer
Late 30’s Oahu Tonemaster
LSLME Chatsworth (Lap Steel Legacy Mark Evans w/Sentell cust. Single coil)
Early 40’s Mysterious Employee built National ‘New Yorker’
2017 Richard Wilson Style 1 Weissenborn
Rickenbacker ‘Ace’ lap steel
Quilter 101