Help with a Mike Auldridge solo?

Written music for steel guitar

Moderator: Ricky Davis

Andrew Wright
Posts: 206
Joined: 21 Jun 2014 8:00 am
Location: Indiana, USA

Help with a Mike Auldridge solo?

Post by Andrew Wright »

I'm horrible at pedal steel.

I'm trying to figure out a Mike Auldridge solo from a Chesapeake tune. Got the first bit, but I'm fishing all over for the next part and just not finding it. Anybody have time to help point me in the right direction?

https://www.youtube.com/watch?v=Gv1rGcgxHVA

Solo starts at 1:50. I have from 1:50-1:54, but I can't find the riff from 1:55- 2:00 to save my life.
John Steele (deceased)
Posts: 3188
Joined: 4 Aug 1998 11:00 pm
Location: Renfrew, Ontario, Canada

Post by John Steele (deceased) »

I don't know if Mike used a 5th string half tone lower or not.... or if you have one, but either way -
When you get down to the third fret, strings 5,6 & 8,
no pedals, then push your A pedal on and off again quickly, then go down to fret one, same strings, and either lower your 5th with a lever, or alternatively leave the 5th string open while still barring 6 & 8 at the first fret.
Then it goes back up again, so either let the lever go, or replace the bar on the 5th string at the first fret, then move the whole mess back up to 3.
I'm pretty sure Mike is using a lever to lower 5, but in this particular case, you have the option of using the open string instead. That's my best guess, fwiw.
- John
Andrew Wright
Posts: 206
Joined: 21 Jun 2014 8:00 am
Location: Indiana, USA

Post by Andrew Wright »

Thank you, John! I'll try that tonight and see if I can at least get into the ballpark...